Terraco Styrobond is a basecoat in the Terraco EIFS System. It provides an excellent basecoat for embedding Terramesh glass fibre mesh on top of which the primer and EIFS finishing coat are applied. It can also be used in place of Styrofix as an adhesive.
Terraco offers several varieties of Terraco Styrobond basecoats, ready-mix and dry-powder versions, each to meet different requirements.
TECHNICAL INFORMATION
Styrobond (Ready-mix) |
Use | Consumption | Literature |
A ready-mixed acrylic paste mixed with cement on site (ratio 1:1) and thereafter used as a dual purpose insulation board adhesive and basecoat. | 1.7kg/m²/mm of thickness. | ||
Packaging | Features | Benefits | |
25 kg paper bags |
Familiar 1:1 mixing ratio and add up to 1.5-2.0 litres of water to desired workability. Provides smooth consistency. Good flexural strength. Water resistant. Environmentally friendly, water based. |
Easy to mix with a high speed mixer and allow to stand for 10 minutes, remix and use. Easy to trowel on, increasing productivity. Excellent adhesion. Ensures that system is vapour permeable. Safe, non-toxic, clean tools with water. |
Styrobond DP (Dry-powder) |
Use | Consumption | Literature |
A polymer modified dry-mix base coat used as an embedding mortar applied over the insulation boards to embed the Terramesh prior to application of finish coats. It can also be used an adhesive between a mortar (solid) substrate and the insulation board, however Terraco recommends the use of Styrofix in most cases. |
4-5kg/m² | ||
Packaging | Features | Benefits | |
25 kg paper bags |
Familiar 4:1 mixing ratio of powder to water. Available in 2 colours. Provides smooth consistency. Good flexural strength - ≥ 3.5 / mm². Water resistant. Environmentally friendly, water based. |
Easy to mix with a high speed mixer for 3-5 minutes, allow to stand for 10 minutes, remix and use. Natural white or Grey. Easy to trowel on, speedy mesh embedding, increasing productivity. Excellent adhesion. Ensures that system is vapour permeable. Safe, non-toxic, clean tools with water. |
Styrobond DP FM (Dry-powder Fibre Modified) |
Use | Consumption | Literature |
A specifically formulated flexible polymer modified dry-mix adhesive designed for use on profiled EXP / EPS as decorative coving and cornices where it is not possible to embed Terramesh. | 1.5kg/m²/thickness For 2-3mm application thickness: 3-5kg/m² |
||
Packaging |
Features | Benefits | |
25 kg paper bags |
Familiar 4:1 mixing ratio of powder to water. Can be spray applied. Tough flexible finish. Good flexural strength. Water resistant. Environmentally friendly, water based. |
Easy to mix with a high speed mixer for 3-5 minutes, allow to stand for 10 minutes, remix and use. Easy application, increasing Ensures good impact resistance. Excellent adhesion. Ensures that system is vapour permeable. Safe, non-toxic, clean tools with water. |
Styrobond DP HB (Dry-powder High Build) |
Use | Consumption | Literature |
A high build fibre modified dry-mix base coat used to embed Terramesh over EPS, XPS and MW for EIFS and ICF systems prior to the finish coats. | 8-16kg/m² Application thickness: 5-10mm |
||
Packaging | Features | Benefits | |
25 kg paper bags |
Familiar mixing ratio of 25kg powder to 5-6 litres of water. Good impact resistance. Good flexural strength. Water resistant. Environmentally friendly, water based. |
Easy to mix with a high speed mixer for 3-5 minutes. High build base coat up to 10 mm thick. Excellent adhesion. Ensures that system is vapour permeable. Safe, non-toxic, clean tools with water. |
For more technical information please read Technical Data Sheets available on this page or contact the Terraco representative closest to you.